Top 3 Ways To Set a Post Without Concrete

It’s convenient not to buy concrete whenever you want to install a post. Using objects from your backyard or storage shed is a simple way to get started.

Earth, gravel, gravel, and cleats are your alternatives for establishing a fence post without concrete. To discover which solution I favor that does not require concrete, continue reading.

Why not use concrete?

Concrete is an excellent choice for burying your pole and keeping it in place for a long time. It’s also really straightforward. Find out how to set your post in concrete by reading this article.

However, putting your post in stone can also cause you some issues. Depending on where you live and the quantity of moisture, concrete may cause your post to rot.

Moisture begins to accumulate inside a tent as soon as used for an extended period. Your post suffers from the same fate.

Moisture that seeps into the concrete around the post will remain there long. After a few years, your post will begin to rot, and you will need to replace it.

Some people say their post has rotted out within six years of being set. Some people claim it happened sooner than that.

“Collar rot” is a common term for this condition. Concrete may be the quickest way to get your post up, but its drawbacks.

What’s the Point of Planet Earth?

You can simply use the dirt you’ve dug out of your hole to set the post. Once you have the post in place, all you have to do is fill in the hole with earth.

As we’ll see in a moment, you should take some specific steps when placing the dirt back in the hole. If you don’t have the money to acquire extra objects, or if you need to put a lot of posts, using dirt is a decent solution.

Recommended: Top 3 Tips to Winterize Your Garden Strawberries

To set your post with just the earth, here are some instructions.

To set your post in the ground, simply follow these steps:

  1. Use a drill to excavate your hole. One-third of the post length should be the diameter of the hole. A post that is 5 feet above the ground requires a hole 3 feet deep and a post that is at least 8 feet long. To remove the dirt from the hole, use a post-hole digger to scoop it out and set it on an adjacent tarp. This will make it easy for you to use the dirt when you need it.
  2. The bottom of the hole should be as flat as possible, so place a boulder there. This rock will serve as the post’s foundation and aid in its stability.
  3. Attach two-by-fours to each of the post’s perpendicular sides and let the ends of the two-by-fours fall to the ground as you place the post. These two-by-fours will support the post.
  4. Fill the hole with earth. Compact the dirt in the hole using a two-by-four by pushing and compacting it. To ensure that the post is level, attach a level to it and check to see if it is level with the ground.
  5. Step 4 should be repeated until the entire hole has been filled. The closer you get to the top, the more difficult it will be to make adjustments.
  6. Then, you’re done.

What’s the point of gravel?

Compared to merely using dirt, using gravel will provide you with a far more stable foundation. There will be little movement because of the firm basis provided by the gravel and dirt.

Make sure your post is where you want it before putting it in the gravel. Otherwise, you won’t be able to relocate it afterward.

You may be able to find gravel in your ward, in your neighbourhood, or at a nearby rock quarry for a reasonable price.

Recommended: Top 5 Ways to Winterize Your Lawn Mower

What you need to know about putting up a post with just gravel

It will be similar to using just earth, but there will be a few minor differences:

  1. Use a drill to excavate your hole. One-third of the post length should be the diameter of the hole. A post that is 5 feet above the ground requires a hole 3 feet deep and a post that is at least 8 feet long. To remove the dirt from the hole, use a post hole digger to scoop it out and set it on an adjacent tarp. You’ll be able to put more of the soil to good use.
  2. The bottom of the hole should be as flat as possible, so place a boulder there. This rock will serve as the post’s foundation and aid in its stability.
  3. Attach two-by-fours to each of the post’s perpendicular sides and let the ends of the two-by-fours fall to the ground as you place the post. These two-by-fours will support the post.
  4. Fill the hole with a two- to four-inch layer of gravel. To ensure that the post is level, attach a level to it and check to see if it is level with the ground.
  5. Step 4 should be repeated as many times as necessary until you’ve filled the hole to the top. The closer you get to the top, the more difficult it will be to make adjustments.
  6. Shovel dirt into the voids left by the gravel and pack it down with a two-by-four once fully compacted. This will help you build a solid foundation from which to build. Keep adding dirt until you’ve filled in all the gaps.
  7. Then, you’re done.

Why use cleats and gravel?

Gravel and cleats are the most time-consuming of the three options, but they are also the most stable.

To build the cleats, you’ll need to cut one-by-fours or two-by-fours 4 to 6 inches longer than the length of the post, then attach them to the bottom of the post.

Once the one-by-fours or two-by-fours have been fastened, you fill the pit with gravel and earth to provide a solid foundation.

Recommended: Are Trampolines Bad For Your Back?

Setting a post with cleats and gravel.

Using gravel and cleats will offer you the most stable basis of all the non-concrete options, but it will also require more time and effort.

Hopefully, you’ll think it’s worthwhile to put in the extra effort.

  1. Use a drill to excavate your hole. One-third of the post length should be the diameter of the hole. A post that is 5 feet above the ground requires a hole 3 feet deep and a post that is at least 8 feet long. To remove the dirt from the hole, use a post-hole digger to scoop it out and set it on an adjacent tarp. This will make it easy for you to use the dirt when you need it.
  2. In the bottom of the hole, place a flat-bottomed rock. This rock will serve as the post’s foundation and aid in its stability.
  3. Measure the width of the post and cut several two-by-fours accordingly. Cut a two-by-four four inches long, for example, if your post is a two-by-two. To complete this step, you will need to join two of the cut pieces to the bottom of the post. Two screws or two nails will be used to secure them to the wall. The perpendicular side of a third trimmed two-by-four should be joined slightly above where the first two were fastened. Stabilizing the post using two-by-fours buried in the ground will provide a platform from which to stand.
  4. When you’ve finished attaching the two-by-fours to the post’s base, you’re ready to put the post and add more two-by-fours to the perpendicular sides of the post. These two-by-fours will support the post.
  5. The hole should be filled with gravel. Fix the level to the post and adjust it if necessary to ensure that it is level with the ground.
  6. Step 5 should be repeated until the hole is filled. The closer you get to the top, the more difficult it will be to make adjustments.
  7. Using soil from your tarp, fill all the gaps until there are no more holes.
  8. Then, you’re done.

Recommended: Top 5 Things To Do To Winterize Your Outside and Inside Faucets

Summary

There are several ways to set a post without a specific location. Setting the post in dirt saves money because you don’t need to buy anything more, but it’s not as stable as other solutions.

Setting in gravel provides a solid foundation. To get the greatest foundation possible, you’ll need to use gravel and cleats.

Leave a Comment